User Manual Q&AAnswer
Feb 06, 2025 - 12:05 AM
The eSAM603 mixer accepts microphone signals through the Euro block connector on the rear panel. The microphone inputs are mono and require low impedance microphones (200 to 600 Ω). The wiring diagram for microphones is provided in the manual. The eSAM603 also provides +18V DC phantom power for condenser microphones, which can be enabled by adjusting the internal jumper. It is important to note that the eSAM603 does not have an RIAA preamp equipped input, so turntables cannot be directly connected to this unit.
Add New Comment