How do I connect the REDBACK VSETT8+ Electric Scooter to a control system or third-party controller? (REDBACK VSETT8+ Trotinete Electrice VSETT User Manual)

Answer

manuals.plus

Feb 06, 2025 - 12:00 AM


To connect the REDBACK VSETT8+ Electric Scooter to a control system or third-party controller, you will need to follow the instructions provided in the user manual. Here is a step-by-step guide:

1. Ensure that you have a 24V DC power source with a 2.1mm Jack (center positive) or a euro block connector.

2. Connect the 24V DC power source to the REDBACK VSETT8+ Electric Scooter using the appropriate connector.

3. If you are using a control system or third-party controller that utilizes RS232 or RS485 serial codes, connect the corresponding RS232 or RS485 input connector of the REDBACK VSETT8+ Electric Scooter to the output of the control system or third-party controller. Follow standard RS232 or RS485 wiring when making these connections.

4. If you are using the REDBACK A 6500 wall plate, connect it to the REDBACK VSETT8+ Electric Scooter using a Cat5e/6 cable. The wall plate should be programmed with the serial codes using the PC software provided with the REDBACK A 6500.

5. If you need to control other devices along with the REDBACK VSETT8+ Electric Scooter, connect the REDBACK A 6500 to the REDBACK A 6505 using a Cat5e/6 cable. The REDBACK A 6505 can then control relays, IR repeaters, and send serial codes to other equipment.

Please refer to the user manual for detailed diagrams and further instructions on connecting the REDBACK VSETT8+ Electric Scooter to a control system or third-party controller.