User Manual Q&AAnswer
Feb 05, 2025 - 11:31 PM
To pair the Rayrun BR01-11 LED remote controller to the receiver, please follow these steps:
1. Cut off the power of the receiver and wait for more than 5 seconds.
2. Power on the receiver again.
3. Within 10 seconds after the receiver is powered on, simultaneously and briefly hold press the two keys noted with the pair function on the remote controller.
4. After performing this operation, the remote controller will be paired to the receiver and ready to work.
Please note that you can pair up to 5 remote controllers to one receiver, and each single remote controller can be paired to any receiver.
For more detailed instructions and information, please refer to the Rayrun BR01-11 LED Remote Controller User Manual.
Add New Comment