User Manual Q&AAnswer
Feb 05, 2025 - 11:29 PM
To pair the Rayrun BW03-C Wall Panel Touch Remote Controller with a receiver, follow these steps:
1. Cut off the power of the receiver and wait for more than 5 seconds.
2. Power on the receiver again.
3. Within 10 seconds after the receiver is powered on, simultaneously touch the "Pair" key and the "Unpair" key on the wall panel.
4. Release all keys.
5. Within 10 seconds, touch the "Pair" key or one of the digit keys (1-4) to pair the wall panel to the receiver. If you use the "Pair" key, the receiver will be paired without group feature. If you use one of the digit keys, the receiver will be paired to the corresponding target group.
6. To unpair the wall panel from the receiver, repeat steps 1 and 2. Then, release all keys and press the "Unpair" key within 10 seconds.
Please refer to the Rayrun BW03-C Wall Panel Touch Remote Controller User Manual for more detailed instructions and illustrations.
Add New Comment