User Manual Q&AAnswer
Feb 05, 2025 - 11:27 PM
To install the Rayrun BW01-C Wall Panel Rotary Remote Controller, you have two options depending on the power supply version.
For the AC version:
1. Open the touch panel by using a slot-type screwdriver to twist in the bottom side slot.
2. Cut off the AC power before installation to avoid electric shock.
3. Push the top of the connector on the bottom part back and insert the L and N AC power cables.
4. Install the bottom part of the wall socket with screws.
5. Clip the front panel part to the bottom part to finish the installation.
For the battery version:
1. Open the touch panel by using a slot-type screwdriver to twist in the bottom side slot.
2. Pull out the insulation tape under the battery if it's a new wall panel. If you need to change the battery, slide the battery out from the battery socket and install a new CR2032 battery.
3. Install the back cover to the preferred place with a xxxx or double-sided adhesive tape.
4. Clip the front panel part to the back cover to finish the installation.
Please refer to the provided pictures in the manual (pictures 1, 3, and 4) for visual guidance on the installation process.
Add New Comment