User Manual Q&AAnswer
Feb 05, 2025 - 11:26 PM
To pair the Rayrun BR11 LED remote controller to the receiver, please follow these steps:
1. Cut off the power of the receiver and wait for at least 5 seconds.
2. Power on the receiver again.
3. Within 10 seconds after the receiver is powered on, press the button on the remote controller 5 times continuously and quickly.
4. The remote controller will be paired with the receiver.
Note: You can pair up to 5 remote controllers to one receiver, and each remote can be paired to any receiver.
If you want to unpair the remote controller from the receiver, follow the same steps but press the button 7 times instead of 5.
For more detailed instructions and information, please refer to the Rayrun BR11 LED Remote Controller's quick installation guide.
Add New Comment