User Manual Q&AAnswer
Feb 05, 2025 - 11:25 PM
To pair the Rayrun BR03-CG LED remote controller to the receiver, please follow these steps:
1. Cut off the power of the receiver and wait for at least 5 seconds.
2. Power on the receiver again.
3. Within 10 seconds after the receiver is powered on, press both the "remote" and "key" buttons on the remote controller simultaneously and briefly.
4. Release all buttons.
5. Within 10 seconds, press either the "key" button or one of the 1-4 digit keys on the remote controller. If you press the "key" button, the receiver will be paired without group feature. If you press one of the 1-4 digit keys, the receiver will be paired to the corresponding target group.
6. To unpair the remote controller from the receiver, repeat steps 1-2, then release all buttons and press the "key" button within 10 seconds.
Please note that you can pair up to 5 remote controllers to one receiver, and each remote controller can be paired to any receiver.
Add New Comment