User Manual Q&AAnswer
Feb 05, 2025 - 11:22 PM
To pair the Rayrun BR03-11 LED remote controller to the receiver, please follow these steps:
1. Cut off the power of the receiver and wait for more than 5 seconds.
2. Power on the receiver again.
3. Within 10 seconds after the receiver is powered on, press the "remote" and "key" buttons on the remote controller simultaneously and briefly.
4. Release all keys.
5. Within 10 seconds, press the "key" button on the remote controller to pair it with the receiver.
To unpair the remote controller from the receiver, follow these steps:
1. Repeat steps 1 and 2 mentioned above.
2. After cutting off and powering on the receiver, release all keys on the remote controller.
3. Within 10 seconds, press the "key" button on the remote controller to unpair it from the receiver.
Please note that you can pair up to 5 remote controllers to one receiver, and each remote controller can be paired to any receiver. The working voltage of the remote controller is DC 3V, powered by a CR2032 battery. The wireless protocol used is Umi protocol based on SIG BLE Mesh 2.4GHz ISM band, with a frequency band of less than 7dBm. The wireless power is also less than 7dBm. The working temperature range is -20 to 55 degrees Celsius (-4 to 131 degrees Fahrenheit).
Add New Comment