User Manual Q&AAnswer
Feb 05, 2025 - 11:17 PM
To connect the Rayrun NM10 LED Controller to a power supply, follow these steps:
1. Locate the power supply input on the controller.
2. Connect the power supply to the controller by connecting the positive (+) terminal of the power supply to the positive (+) unit of the controller.
3. Ensure that the power supply voltage is within the range of DC 5V to 24V.
4. Make sure the power supply is capable of handling the load wattage.
5. The maximum cable gauge for the power supply is AWG12 or 2.5mm.
6. Double-check that the power supply voltage is correct and suitable for the connected LED load.
Please note that the power input of the controller is directly connected to the output terminal inside the controller.
Add New Comment