User Manual Q&AAnswer
Feb 05, 2025 - 11:06 PM
To reverse the door on the TESLA RS0880H Larder, follow these steps:
1. Ensure that the unit is unplugged and empty.
2. Tilt the unit backwards and rest it on something solid to prevent slipping.
3. Remove the top right hinge cover.
4. Move the core cover from the left side to the right side.
5. Lift the upper door and place it on a padded surface to prevent scratching.
6. Undo the screws and remove the hinge bracket.
7. Unscrew and remove the bottom hinge pin, turn the bracket over, and replace it.
8. Remove the top left xxxx cover.
9. Reattach the bracket, fitting the bottom hinge pin.
10. Replace both adjustable feet.
11. Put the hinge cover and xxxx cover back in place.
12. Place the door back on, ensuring it is aligned horizontally and vertically so that the seals are closed on all sides. 13. Tighten the top hinge. 14. Insert the hinge bracket and xxxx it to the top of the unit. Use a spanner to tighten if necessary. 15. Detach the fridge and freezer door gaskets and then attach them after rotating. 16. Install the door external handle (if present). Please note that it is recommended to have two people handle the unit during the door reversing process. Make sure to refer to the user manual for any specific instructions or illustrations related to your model.
Add New Comment