User Manual Q&AAnswer
Feb 05, 2025 - 10:50 PM
To connect LED fixtures to the Rayrun T140 RGBW LED Advanced RF Remote Controller, you will need to follow these steps:
1. Connect the LED common anode cable to the terminal marked with a '+' or a black cable.
2. Connect each channel LED cable to the relevant color cables.
3. Make sure that the LED rated voltage is the same as the power supply voltage.
4. Ensure that each channel's maximum load current is below the controller's rated current.
5. CAUTION: Make sure that the output cables are well insulated from each other to prevent short circuits, as this could permanently damage the controller.
Please refer to the wiring diagram in the user manual for a visual representation of the connections.
Add New Comment