User Manual Q&AAnswer
Feb 05, 2025 - 10:25 PM
To connect the WORK NEO IP Series loudspeakers to a 70/100V line amplifier, you need to follow these steps:
1. Identify the cables marked as 2 & 3 (Orange, Green colors) on the loudspeaker. These cables correspond to the 80 position on the amplifier.
2. Connect the cables marked as 2 & 3 on the loudspeaker between them. This means connecting the orange cable to the green cable.
3. Make sure to select the correct power cable before connecting the loudspeaker to the amplifier. If you select the low impedance position (80), the loudspeaker could be damaged.
Please refer to the label on the rear side of the loudspeaker for further guidance on connecting to the 70/100V line amplifier.
Note: It is always recommended to consult the user manual or contact a suitably qualified expert if you have any doubts or need further assistance with the installation process.
Add New Comment