User Manual Q&AAnswer
Feb 05, 2025 - 10:21 PM
To connect the eCA120HZ amplifier to your speakers, you will need to use the OUTPUT terminals on the amplifier. The OUTPUT uses a Euroblock connector with a common terminal (0V), a terminal for a 70V line, and another terminal for a 100V line. Always use the common terminal and, depending on the type of speaker in the system, one of the two others, 70 or 100V, to feed the loudspeaker line.
It is important to use good quality, shielded cables with a suitable cross-section and keep the connection cable between the amplifier and speakers as short as possible. Make sure the total power used by the speakers connected to the eCA120HZ does not exceed the maximum power it can provide.
For more detailed instructions and illustrations, please refer to the "Audio output connections" section in the user manual provided.
Add New Comment