User Manual Q&AAnswer
Feb 05, 2025 - 10:16 PM
To pair a new remote controller to the Rayrun N11 Single Color LED Dimmer, follow these steps:
1. Disconnect the power supply of the main unit and wait for at least 5 seconds.
2. Reconnect the power supply to the main unit.
3. Within 10 seconds after the main unit is powered on, press and hold the '100%' and '60%' keys on the remote controller simultaneously for about 3 seconds.
4. The main unit will now be paired with the new remote controller.
Note: The Rayrun N11 Single Color LED Dimmer can be paired with up to 5 remote controllers, and each remote controller can be paired with any main unit.
Add New Comment