User Manual Q&AAnswer
Feb 05, 2025 - 09:49 PM
To pair a new remote controller with the Rayrun T130 RGB LED Controller, please follow these steps:
1. Plug off the power of the receiver and plug it in again after more than 5 seconds.
2. Press the "MODE-" and "MODE+" keys simultaneously for about 3 seconds, within 10 seconds after the receiver is powered on.
3. After performing this operation, the LED fixture will flash quickly to acknowledge that the remote pairing is accomplished.
By following these steps, you can pair a new remote controller with the Rayrun T130 RGB LED Controller.
Add New Comment