User Manual Q&AAnswer
Feb 05, 2025 - 09:48 PM
To connect the Rayrun T120 Tunable White LED Controller to your LED strip or module, follow these steps:
1. Power supply input: The controller supports a voltage range of DC 5V to 24V. Make sure to check the polarity indicated on the controller and connect the power supply accordingly. The positive power cable should be directly connected to the output cable inside the controller.
2. LED output: Connect your LED load (strip or module) to the controller's LED output. Again, refer to the polarity indicated on the controller and connect the LED load with the corresponding polarity. Ensure that the LED's rated voltage matches the power supply voltage and that the maximum load current is below the controller's rated current.
CAUTION: Be careful to avoid short-circuiting the output cables, as this could permanently damage the controller. Insulate the cables properly to prevent them from coming into contact with each other.
Please refer to the wiring diagram provided in the manual for a visual representation of the connections.
Note: Before powering on, double-check that all cables are securely connected and insulated.
For more detailed information and illustrations, please consult the Rayrun T120 Tunable White LED Controller User Manual.
Add New Comment