User Manual Q&AAnswer
Feb 05, 2025 - 09:46 PM
To connect the Rayrun T112 Single Color LED Dimmer to your LED strip or module, follow these steps:
1. Power supply input: The controller has a voltage range of DC 5V to 24V. Make sure to check the polarity indicated on the controller and connect the power supply accordingly. The positive power cable should be directly connected to the output cable inside the controller.
2. LED output: Connect your LED load (strip or module) to the controller. Again, refer to the polarity indicated on the controller and connect the LED load with the correct polarity. Ensure that the LED's rated voltage matches the power supply voltage and that the maximum load current is below the controller's rated current.
CAUTION: Avoid short-circuiting the output cables, as it may permanently damage the controller. Make sure all cables are well insulated.
3. Wiring diagram: Connect the controller's output to the LED load and the power supply to the controller's power input. The output voltage of the power supply must match the LED load's rated voltage. Before powering on, double-check that all cables are properly connected and insulated.
For more information and visual references, please refer to the Rayrun T112 Single Color LED Dimmer User Manual.
Add New Comment