User Manual Q&AAnswer
Feb 05, 2025 - 09:44 PM
To pair a new remote controller with the T110 LED controller, please follow these steps:
1. Plug off the power of the LED controller and wait for at least 5 seconds.
2. Plug in the power of the LED controller again.
3. Within 10 seconds after the LED controller is powered on, press and hold the "+" and "-" keys on the new remote controller simultaneously for about 3 seconds.
4. After performing the above operation, the LED fixture connected to the LED controller will flash quickly to indicate that the remote pairing is successful.
Please note that the T110 LED controller can be paired with a maximum of 5 remote controllers, and each remote controller can be paired with multiple LED controllers.
Add New Comment