How do I install the ARTUSI ATH601B Cooker Hood? (ARTUSI ATH601B Cooker Hood Instruction Manual)

Answer

manuals.plus

Feb 05, 2025 - 09:05 PM


To install the ARTUSI ATH601B Cooker Hood, please follow these steps:

1. Check the voltage and frequency given on the rating plate located on the inside of the hood.
2. Ensure that the bottom of the hood is no less than 600mm and no more than 750mm above the stove's heating elements and burners.
3. Use the provided stencil to mark the position of the hood on the wall. Drill four 8mm holes on the marked positions and insert four sets of expanding plug screws.
4. Hang the hood on the wall, aligning the two installation holes with the screws. Adjust the hood to the desired position.
5.  xxxx  down the four screws, starting with the upper two screws and then the others.
6. Connect the hose with the air duct.
7. Choose the appropriate ducting option based on your kitchen setup. The most common options are vertical ducting or ducting through a soffit.
8. Assemble the outer chimney and inner chimney on the windshield.
9. Install the chimney fixed bolster on the corresponding position on the wall.
10. Use the provided  xxxx  to connect the chimney fixed bolster and the upper chimney.

Please refer to the ARTUSI ATH601B Cooker Hood Instruction Manual for detailed installation instructions and diagrams.

Note: It is important to follow all safety precautions mentioned in the manual, such as disconnecting the electrical plug before any maintenance and ensuring adequate ventilation when using the cooker hood with gas or other fuel-burning appliances.