User Manual Q&AAnswer
Feb 05, 2025 - 08:49 PM
To install the LIVARNO home LED Ceiling Light, follow these steps:
1. Remove all packaging material from the light.
2. Remove the visible screws on the side of the terminal housing and take off the mounting bracket on the rear.
3. Use the slotted holes on the mounting bracket as a guide to mark the drilling holes on the wall or ceiling.
4. Drill the mounting holes, making sure not to damage the power cable.
5. Insert the wall plugs into the drilled holes and fasten the mounting bracket using the provided screws.
6. Pull the protective tubes over the cables of the mains connection cable.
7. Connect the mains connection cable to the lamp using the lustre terminal. Make sure the colors of the connected wires match (black or brown live wire = L symbol, blue neutral wire = N symbol).
8. Connect the protective conductor (green-yellow) to the earth terminal marked in the terminal housing.
9. Use the screws to fasten the light to the mounting bracket.
For model 14153105L:
10. xxxx both adjustable lamp arms to the ceiling.
11. Move the lamp arms to the desired position and mark the drill holes.
12. Drill the fixing holes, being careful not to damage the power cable.
13. Insert the wall plugs into the drilled holes.
14. Unscrew the bulb socket by turning the ceiling bracket. Push one xxxx through one base and xxxx it into the wall plug. xxxx the ceiling mount into the base. Attach the lamp arm to the ceiling mount.
15. Carefully xxxx the light bulb into the bulb socket by turning it clockwise.
16. Replace the fuse or switch on the circuit breaker in the fuse box.
Your LIVARNO home LED Ceiling Light is now ready to use.
Please note that these instructions are a summary and it is important to refer to the complete instruction manual for detailed installation steps and safety precautions.
Add New Comment