User Manual Q&AAnswer
Feb 05, 2025 - 06:28 AM
To charge the NOCO GB20 Boost Sports, follow these steps:
1. Connect the GB20 to a power source using the included USB Charge Cable. You can use a USB-powered port such as an AC adapter, car charger, laptop, or any other USB power source.
2. Plug the USB end of the cable into the USB IN port on the GB20.
3. Plug the other end of the cable into the USB power source.
4. The GB20 comes partially charged, but it is recommended to fully charge it before use. The charge level of the internal battery is indicated by the Charge LEDs. The LEDs will slowly pulse 'On' and 'Off' and become solid until all four Charge LEDs are on. When the battery is fully charged, the Green 100% LED will be solid, and the 25%, 50%, and 75% Charge LEDs will turn off.
5. Recharging time will vary depending on the discharge level and the power source used. It is important to note that charging and discharging the unit simultaneously is not recommended due to FCC regulations.
6. It is also recommended to periodically recharge the GB20 to maintain its battery life. If the Green 100% LED is pulsing, it indicates that maintenance charging is occurring.
Please refer to the user guide for more detailed instructions and safety precautions.
Add New Comment