User Manual Q&AAnswer
Feb 05, 2025 - 06:08 AM
To install the USBNOVEL 600Mbps USB WiFi Adapter on your computer, please follow these steps:
1. Insert the included CD into your computer's CD drive.
2. Run the setup file from the CD to install the driver software. If the CD cannot be utilized, you can download the driver from the USBNOVEL website.
3. Follow the on-screen instructions to complete the installation process.
4. Once the driver is installed, connect the USB WiFi Adapter to an available USB port on your computer.
5. The adapter will be automatically recognized by your computer and should start working. If not, you may need to restart your computer.
If you encounter any issues during the installation process or if the adapter is not working properly, please refer to the instruction guide or contact USBNOVEL's technical support for further assistance.
Note: The USBNOVEL 600Mbps USB WiFi Adapter is compatible with Windows XP/7/8.1/10 (32-bit/64-bit) and Mac OS X 10.5-10.15. Make sure your operating system is supported before installing the adapter.
Add New Comment