User Manual Q&AAnswer
Feb 05, 2025 - 04:42 AM
To clean the CWKJ HK-1340 400GPH Submersible Water Pump, you can follow these steps:
1. Turn off the power supply and unplug the pump from the electrical outlet.
2. Remove the pump from the water or tank.
3. Disassemble the pump by removing the shell. This will allow you to access the filter and impeller.
4. Clean the filter and impeller using a soft brush or cloth. Remove any debris or dirt that may have accumulated.
5. If necessary, you can also soak the filter and impeller in a mixture of water and vinegar to remove any stubborn dirt or mineral deposits.
6. Rinse the filter and impeller thoroughly with clean water to remove any residue.
7. Reassemble the pump by putting the shell back on.
8. Place the pump back into the water or tank.
9. Plug in the pump and turn on the power supply.
It is recommended to clean the pump regularly to maintain its efficiency and prolong its lifespan.
Add New Comment