User Manual Q&AAnswer
Feb 05, 2025 - 04:41 AM
To install the TECKNET WA658 Waterproof Plug-in Cordless Wireless Doorbell, you have several options:
1. Adhesive Tape: Apply the double-sided adhesive tape on the back of the receiver or transmitter case. Remove the outer side of the tape and attach the receiver or transmitter to the desired position. Press firmly for 30 seconds to ensure proper adhesion. Note that the stand should not be assembled for the receiver if using adhesive tape.
2. xxxx : There is a xxxx hole in the rear of the receiver. First, tighten a xxxx on the desired position, leaving about 2mm protruding. Then, simply put the receiver on the xxxx , and the installation is complete.
3. Stand: Assemble the included stand on the rear slot of the receiver. You can then place the receiver in the desired position.
It is recommended to complete the music selection and pairing before installing the receiver and transmitter to ensure proper functionality.
For more detailed instructions and illustrations, please refer to the user guide provided with the TECKNET WA658 Waterproof Plug-in Cordless Wireless Doorbell.
Add New Comment