User Manual Q&AAnswer
Feb 05, 2025 - 04:07 AM
To pair the remote control with the outlet, follow these steps:
1. Make sure the outlet is plugged into a power source and turned on.
2. Remove the battery cover from the remote control and insert the included CR2032 battery.
3. Press and hold the ON button on the remote control for 3 seconds until the LED indicator on the outlet starts flashing.
4. Release the ON button and the LED indicator on the outlet will continue flashing.
5. Within 30 seconds, press any button on the remote control to pair it with the outlet.
6. The LED indicator on the outlet will stop flashing and remain solid, indicating successful pairing.
Note: If the LED indicator on the outlet does not stop flashing after pressing a button on the remote control, repeat the pairing process from step 3.
For more detailed instructions and troubleshooting tips, please refer to the DEWENWILS HORS13B Outdoor Remote Control Outlet User Guide.
Add New Comment