User Manual Q&AAnswer
Feb 05, 2025 - 03:51 AM
To install the Cable Matters 202023 Plug & Play USB to Ethernet Adapter, follow these steps:
1. Connect the adapter to a USB port on your computer and ensure that the blue LED is lit.
2. Connect an Ethernet patch cable from the adapter to a router or LAN.
3. Refer to the documentation of your router to configure network access.
Note: The green LED indicates a live network connection, and the yellow LED indicates data transfer status.
If you encounter any issues during installation, here are some troubleshooting tips:
1. Reboot your computer and router.
2. Check that the LEDs on the adapter are lit.
3. Configure the adapter with a static IP address if required.
4. Test by turning off all wireless functions.
5. Test the Ethernet patch cable with another computer.
6. Try using a different USB port or computer.
To verify that your computer recognizes the adapter, follow these steps:
For Windows:
- Go to Control Panel > Device Manager > Network adapters > Realtek USB.
- Ensure that the adapter is listed.
For macOS:
- Go to the Apple Menu > System Preferences > Network > USB 10/100 LAN.
- Ensure that the adapter is listed.
For any further questions or technical support, you can contact Cable Matters via email at support@cablematters.com.
Add New Comment