User Manual Q&AAnswer
Feb 05, 2025 - 01:22 AM
To adjust the brightness and color temperature of the Yesker 10-Inches LED Desktop Selfie Ring Light, you can follow these steps:
1. Make sure the ring light is connected to a power source using a USB cable (power adapter not included).
2. Locate the controller integrated into the power line of the ring light.
3. Press the power button on the controller to turn on the ring light.
4. To adjust the brightness, press the brightness button on the controller. Each press will increase the brightness level by one, and there are a total of 10 levels to choose from (0%-100%).
5. To adjust the color temperature, press the color temperature button on the controller. Each press will cycle through the available color modes: white, natural, and warm. The color temperature options are 3200K, 4500K, and 5500K, respectively.
6. Keep pressing the brightness or color temperature buttons until you reach your desired settings.
7. Once you have adjusted the brightness and color temperature, you can start using the ring light for your desired purpose, such as selfies, cosmetics, video filming, or live broadcasting.
Please note that the specific instructions for adjusting the brightness and color temperature may vary slightly depending on the model or version of the Yesker 10-Inches LED Desktop Selfie Ring Light. It is always recommended to refer to the user manual for detailed instructions and troubleshooting tips.
Add New Comment