How to attach the legs and handles to the Presto 10-Quart Kitchen Kettle XL? (PRESTO 10-Quart Kitchen Kettle Instruction Manual)

Answer

manuals.plus

Feb 05, 2025 - 12:09 AM


To attach the legs to the base of the Kitchen Kettle XL, follow these steps:
1. Place the multi-cooker upside down on a table or counter.
2. Use a #2 Phillips screwdriver to remove the screws from the four mounting projections on the bottom of the multi-cooker and set them aside.
3. Use these screws to attach the legs to the base. Position one leg, with the rubber foot facing up, over one of the mounting projections. Align the hole in the leg with the hole in the mounting projection and fasten securely with the  xxxx . Repeat this step for the other three legs. The legs should be securely attached and the multi-cooker should sit level with no leg rock.

To attach the handles to the base of the Kitchen Kettle XL, follow these steps:
1. Place the multi-cooker upside down on a table or counter.
2. Use a #2 Phillips screwdriver to remove the screws from the tabs on each side of the base and set them aside.
3. Use these screws to attach the handles to the base. Slide one handle, with the  xxxx  hole facing up, onto the tab so that the hole on the tab aligns with the hole on the handle. Fasten securely with the  xxxx . Repeat this step for the other handle. The handles should be securely attached and parallel with the table or counter.

Please refer to the detailed assembly instructions on pages 2 and 3 of the Presto 10-Quart Kitchen Kettle XL Instructions for visual illustrations and additional information.