User Manual Q&AAnswer
Feb 04, 2025 - 06:46 AM
The NavAtlas NA1BT Digital Bluetooth Controller can be mounted in three different ways: rollbar/cage mount, flush mount, and surface mount. Here are the steps for each mounting method:
Rollbar/Cage Mount:
1. Check the mounting depth before cutting.
2. Use the flush bezel as a template.
3. Cut out the hole exactly as indicated.
4. Insert the flush mount bezel and push the side tabs outwards.
5. Optionally, use silicon glue to provide extra hold.
6. Insert the controller into the flush mount bezel.
Flush Mount:
1. Check the mounting depth before drilling.
2. Use the flush bezel as a template.
3. Drill or cut a wire hole exactly as indicated.
4. Insert a rubber bim around the flush bezel and xxxx it in place.
5. Insert the controller into the flush mount bezel.
Surface Mount:
1. Check the mounting depth before drilling.
2. Use the flush bezel as a template.
3. Drill or cut a wire hole exactly as indicated.
4. Insert the controller into the desired location.
Please note that specific tools, such as a crimp tool, wrench or pliers, and a 4mm Allen wrench, may be needed for the installation process.
For visual reference and additional information, please consult the NavAtlas NA1BT Digital Bluetooth Controller Owner's Manual.
Add New Comment