User Manual Q&AAnswer
Feb 04, 2025 - 06:45 AM
To connect the WORK PRO WPE 24 Digital Audio Processor to your audio system, follow these steps:
1. Connect the analog audio inputs of the WPE 24 to your audio source using balanced cables. The device has 2 balanced inputs with Euroblock connectors.
2. Connect the analog audio outputs of the WPE 24 to your audio system using balanced cables. The device has 4 servo-balanced outputs with Euroblock connectors.
3. Connect the LAN port of the WPE 24 to your local network using an Ethernet cable. This port also supports PoE (Power over Ethernet) if your network provides it.
4. Connect the main supply input of the WPE 24 to an external power source. The device requires a 24 Vdc / 500 mA power supply, which is not included.
5. Once the connections are made, you can use the display on the front panel of the WPE 24 to view and configure different parameters of the device. Use the NEXT button to navigate between parameters and the SET button to access and edit specific parameters.
For more detailed instructions and information on configuring the WPE 24, refer to the user manual provided by WORK PRO.
Add New Comment