User Manual Q&AAnswer
Feb 04, 2025 - 06:38 AM
To install the wheel on the Makita GEC01 Cordless Power Cutter, follow these steps:
1. Make sure the tool is switched off and the battery cartridge is removed.
2. Use the provided Makita wrench to loosen the hex bolt on the wheel guard and remove the cover.
3. Press the shaft lock button and hold it to lock the large pulley. Then, turn the nut counterclockwise using the thin end of the box wrench to loosen the synchro-belt.
4. Remove the hex bolt, flange, wheel, ring, and flange in order.
5. Attach the flanges to the wheel, making sure the flat side of the flange faces the wheel.
6. Attach the ring that matches the inner diameter of the wheel.
7. With the grooves on the belt inside, attach one end of the belt to the small pulley and the other end to the large pulley.
8. Tighten the belt by turning the small disc clockwise using the thick end of the box wrench while holding the shaft lock button.
9. Tighten the nut clockwise using the thin end of the box wrench while holding the shaft lock button.
10. Attach the cover and tighten the hex socket bolts using the tip of the box wrench.
Make sure to tighten the hex bolt securely and ensure that the arrow on the wheel points in the same direction as the arrow on the wheel guard. Always use the wheel that is marked with a speed equal to or higher than the speed marked on the tool.
For more detailed instructions, please refer to the Makita GEC01 Cordless Power Cutter Instruction Manual.
Add New Comment