User Manual Q&AAnswer
Feb 04, 2025 - 06:33 AM
To install the HYTRONK HIR Series Flush Mount PIR Motion Sensor, follow these steps:
1. Choose a suitable location on the ceiling for installation. The sensor requires a drill hole of 65mm.
2. Carefully remove the cable clamps from the sensor.
3. Make the necessary connections to the pluggable terminal blocks.
4. Insert the plug connectors and secure them using the provided cable clamps. Then, clip the terminal covers to the base.
5. If required, fit the detection blind and desired lens.
6. Clip the fascia to the body of the sensor.
7. Bend back the springs and insert them into the ceiling.
Once the sensor is installed, it is ready to be used.
Please refer to the HYTRONK HIR Series Flush Mount PIR Motion Sensor Instruction Manual for more detailed installation instructions and illustrations.
Add New Comment