User Manual Q&AAnswer
Feb 04, 2025 - 06:10 AM
To set up your DEWENWILS Wireless Light Switch Remote Control Outlet, please follow these steps:
1. Start by unpacking the contents of the box, which should include the AC Grounded Outlet Switch, Wireless Wall Switch, and the battery (already installed in the remote).
2. Choose a suitable location for the wireless wall switch. It should be within the remote control range of 100 feet (in open area) and easily accessible.
3. Install the wireless wall switch by mounting it on the wall using the provided mounting bracket. Make sure it is securely attached.
4. Plug the AC Grounded Outlet Switch into a wall outlet. This will serve as the receiver for the wireless signal.
5. Test the connection by pressing the buttons on the wireless wall switch. The AC Grounded Outlet Switch should turn on or off accordingly.
6. If you want to add additional DEWENWILS remote controls, plugs, or light sockets to expand your remote system, make sure they are the same model as the one you have. You can add them after the remote controller and receiver have been pre-programmed.
Note: Before using the wall switch, please remove the battery insulation.
If you encounter any issues during the setup process, please refer to the user manual provided with the product for more detailed instructions and troubleshooting tips.
Add New Comment