User Manual Q&AAnswer
Feb 04, 2025 - 05:56 AM
To set up and program the Shark RV850 ION Robot Vacuum, please follow the steps below:
1. Charging the Robot Vacuum:
- Place the robot vacuum on the charging dock.
- Ensure that the charging dock is connected to a power source.
- The robot vacuum will automatically start charging.
2. Initial Setup:
- Once the robot vacuum is fully charged, press the power button on the robot or the remote control to turn it on.
- Select the desired language using the arrow buttons on the remote control.
- Press the OK button to confirm the language selection.
- The robot vacuum will then prompt you to set the time. Use the arrow buttons to adjust the hour and minute, and press OK to confirm.
3. Cleaning Modes:
- The Shark RV850 ION Robot Vacuum offers three cleaning modes: Auto, Spot, and Manual.
- Auto Mode: The robot vacuum will navigate your home and clean all accessible areas.
- Spot Mode: The robot vacuum will clean a specific area by spiraling outward in a concentric pattern.
- Manual Mode: You can use the arrow buttons on the remote control to manually control the robot vacuum's movement.
4. Scheduling Cleaning:
- The Shark RV850 ION Robot Vacuum allows you to schedule cleaning sessions.
- Press the Schedule button on the remote control.
- Use the arrow buttons to set the desired cleaning time and days.
- Press OK to confirm the schedule.
5. Maintenance and Troubleshooting:
- The manual provides detailed instructions on maintenance and troubleshooting, including cleaning the brush roll, emptying the dustbin, and troubleshooting common issues.
Please refer to the user manual provided in the link for more detailed instructions and illustrations.
Add New Comment