User Manual Q&AAnswer
Feb 04, 2025 - 05:45 AM
To replace the battery in the HELLA FS191S Passive Entry and Passive Start Radio Identification Devices, please follow these steps:
1. Make sure to have a replacement coin/button cell battery that matches the specifications mentioned in the user manual.
2. Locate the battery compartment on the device. It may be on the back or bottom of the device.
3. Use a small screwdriver or a coin to open the battery compartment cover.
4. Carefully remove the old battery from the compartment, taking note of the positive (+) and negative (-) terminals.
5. Insert the new battery into the compartment, ensuring that the positive (+) side is facing the correct direction.
6. Close the battery compartment cover securely.
7. Dispose of the old battery properly according to local regulations.
Note: It is important to handle the battery with care and avoid ingesting it. If the battery compartment does not close securely, stop using the device and keep it away from children. If you think a battery has been swallowed or placed inside any part of the body, seek immediate medical attention.
Please refer to the user manual for additional safety warnings and precautions related to battery usage.
Add New Comment