User Manual Q&AAnswer
Feb 04, 2025 - 05:21 AM
To set up the charging dock for your Shark RV750 Series ION Robot Vacuum, follow these steps:
1. Find a level surface against a wall where the charging dock can be placed without any obstructions. This location should be easily accessible by your robot.
2. Plug the charging dock into a power outlet.
3. Flip the robot over and locate the two side brushes included in the box.
4. Snap on the two side brushes onto the robot.
5. Flip the power switch, located on the side of the robot, to the ON position.
6. Place your robot on the charging dock.
7. Wait until all three lights on the robot turn solid blue, indicating that the robot is fully charged.
8. Press the Clean button to send your robot into action.
For more detailed instructions and information, please refer to the Shark RV750 Series ION Robot Vacuum Owner's Guide.
Add New Comment