User Manual Q&AAnswer
Feb 04, 2025 - 05:14 AM
To charge the battery of the Holyton 9205E Remote Control Car, follow these steps:
1. Locate the charging port on the car. It is usually located on the bottom or rear of the car.
2. Connect the included USB charging cable to the charging port of the car.
3. Plug the other end of the USB charging cable into a power source such as a computer, power bank, USB charger, or any other device with a USB output.
4. Ensure that the power source is turned on and supplying power.
5. The charging indicator light on the car will illuminate, indicating that the charging process has started.
6. Allow the battery to charge fully. It takes approximately 180 minutes (3 hours) to fully charge one battery.
7. Once the battery is fully charged, disconnect the USB charging cable from the car.
Note: It is recommended to use the included USB charging cable and follow the specified charging time to avoid overcharging the battery.
If you have any further questions or encounter any issues during the charging process, please refer to the user guide or contact Holyton customer support for assistance.
Add New Comment