User Manual Q&AAnswer
Feb 04, 2025 - 05:13 AM
To adjust the temperature on the FUAVE FVCW20W22 Malmo 2000 Convector Heater, follow these steps:
1. Plug the power cable into a wall socket.
2. Switch the power button to select the desired capacity:
- Button 1: 750 W
- Button 2: 1250 W
- Both buttons: 2000 W
The LED light of the enabled power button will light up.
3. Turn the thermostat switch to the maximum setting.
4. Allow the device to heat the room until the desired temperature is reached.
5. Slowly turn the thermostat switch backwards until you hear a click. This will set the temperature and the LED light of the enabled power button will turn off.
Note: The device will automatically heat the room to the set temperature.
If you have any further questions or need additional assistance, please refer to the FUAVE FVCW20W22 Malmo 2000 Convector Heater User Manual for more detailed instructions.
Add New Comment