How do I assemble and install the ELVITA E115645, E115644 Floor Lamp? (ELVITA E115645 E115644 Floor Lamp User Manual)

Answer

manuals.plus

Feb 04, 2025 - 05:03 AM

To assemble and install the ELVITA E115645, E115644 Floor Lamp, please follow the steps below:

1. Unpack all the components from the packaging and ensure that you have all the necessary parts.

2. Start by attaching the lampshade to the lamp base. Align the holes on the lampshade with the corresponding holes on the lamp base.

3. Insert the screws provided through the holes on the lampshade and tighten them securely using a screwdriver. Make sure the lampshade is firmly attached to the base.

4. Next, locate the power cord coming out from the bottom of the lamp base. Plug the power cord into a suitable electrical outlet.

5. Before turning on the lamp, ensure that the maximum wattage of the bulb you are using does not exceed 40 watts. Using a higher wattage bulb can cause damage to the lamp or even pose a safety hazard.

6. Once the lamp is plugged in, you can turn it on using the switch located on the power cord or on the lamp base itself, depending on the model.

7. The ELVITA E115645, E115644 Floor Lamp is designed for indoor use only. Do not install it in a bathroom, laundry room, or any other wet area.

8. Keep the installation instructions for future reference. If you encounter any issues or have further questions, you can refer back to the manual or contact ELVITA support and service.

Please note that the information provided here is a general guide based on the given product description. For specific instructions and safety precautions, it is always recommended to refer to the user manual provided with the product.