User Manual Q&AAnswer
Feb 04, 2025 - 04:59 AM
To install the THULE 145287 Roof Rack on your vehicle, please follow the steps outlined in the installation instructions provided in the manual. Here is a summarized version of the installation process:
1. Start by identifying the correct roof rack kit included in the package. Each kit is specific to a certain vehicle make and model, so make sure you have the correct one.
2. Before installation, ensure that your vehicle's roof is clean and free from any dirt or debris that may interfere with the installation process.
3. Locate the roof rack mounting points on your vehicle. These are typically found on the roof or along the door frames. Refer to your vehicle's manual or contact the manufacturer if you are unsure about the location of these mounting points.
4. Attach the roof rack feet or towers to the mounting points. The specific method of attachment may vary depending on the kit and vehicle model. The manual provides detailed instructions and illustrations for this step.
5. Once the feet or towers are securely attached, position the crossbars onto the feet or towers. Ensure that the crossbars are evenly spaced and aligned properly.
6. Tighten the screws or bolts provided with the kit to secure the crossbars in place. Make sure they are tightened sufficiently to prevent any movement or loosening during use.
7. After installation, double-check the stability and security of the roof rack by giving it a gentle shake. If there is any noticeable movement, recheck the installation and tighten any loose components.
Please note that this is a general overview of the installation process. For specific instructions and illustrations, refer to the THULE 145287 Roof Rack Instruction Manual provided with the product. If you encounter any difficulties or have further questions, you can contact Thule directly through their website or email provided in the manual.
Add New Comment