User Manual Q&AAnswer
Feb 04, 2025 - 04:58 AM
What You Need:
- Small flathead screwdriver (if needed)
- Replacement fuses (check the packaging or user guide for fuse specs)
Unplug the Lights:
Ensure the lights are disconnected from any power source to avoid electrical hazards.Locate the Fuse Compartment:
The fuse compartment is typically in the plug housing of the lights. Look for a sliding door or a small panel near the prongs.Open the Fuse Cover:
Use a small flathead screwdriver or your fingernail to gently slide or pry open the fuse compartment.Remove the Old Fuses:
There may be two fuses inside. Carefully slide out both fuses using the screwdriver if needed.Inspect the Fuses:
Check for a blackened or broken filament to confirm the fuse is blown.Insert the New Fuses:
Place the replacement fuses into the fuse slots, ensuring they fit snugly.Close the Fuse Compartment:
Snap or slide the compartment cover back into place.Test the Lights:
Plug the lights back in to see if they work properly.
Add New Comment