User Manual Q&AAnswer
Feb 04, 2025 - 04:46 AM
To assemble the COSTWAY TY327808 Kids Toy Storage Shelf, please follow the steps outlined in the user manual:
1. Remove all packaging and separate and count all parts and hardware.
2. Read through each step carefully and follow the proper order.
3. It is recommended to assemble the product near the area where it will be placed to avoid unnecessary moving once assembled.
4. Ensure a secure surface during construction and place the product on a flat, steady, and stable surface.
5. Insert the L-shaped Board into the corresponding hole position along the Side Panel.
6. Insert the Cross Bar and tighten the nut.
7. Assemble the Side Panel.
8. Assemble the Backplane.
9. Assemble the Square Board.
10. Combine the Bookshelves with the Storage Rack.
11. Installation is completed.
12. Put the Storage Box in.
Always follow these rules:
- The product should be installed by an adult.
- This product is only suitable for children aged over 36 months.
- Adult supervision is required at all times.
- Do not approach fire.
- The installation area should be wide, flat, and avoid dampness.
- Be careful not to swallow small parts.
- Check whether the product is firmly installed before use.
- Packing materials should be tidied up and properly preserved.
For maintenance:
- Wipe the surface stains of the product with a dry cloth. If necessary, use mild soap or detergent to clean them. After wiping with a soft wet cloth, wipe them with a dry cloth. Do not use a strong acid-alkaline cleaning solution.
- If not used for a long time, store it in a cool and dry place and cover it with a clean cloth or blanket.
If you have any further questions or need assistance, please contact COSTWAY's friendly customer service department.
Add New Comment