User Manual Q&AAnswer
Feb 04, 2025 - 04:16 AM
To install the SPACECARE SPWC002 Workbench Retractable Casters, follow these steps:
1. Before mounting the screws, use a drill to punch holes in your workbench legs.
2. Attach the mounting plates to the workbench legs using the provided screws. There are a total of 16 screws included, but you can add an additional 2 screws to each caster if desired.
3. Leave a 1-inch gap between the mounting plate and the base of the worktable.
4. Place the pedal up and secure the caster to the workbench with screws. This set of casters is ideal for cabinets, benches, workbenches, and other furniture.
5. To raise your workstation off the ground, depress the foot pedal. Make sure to step on the middle of the pedals rather than the rim for stability.
Please refer to the instruction guide for visual illustrations and additional information on the installation process.
Note: These retractable casters are designed for use on smooth roads and may not be suitable for use on rocky surfaces.
For further assistance or clarification, you can refer to the video provided or contact SPACECARE customer support at 1-800-766-6028.
Add New Comment