User Manual Q&AAnswer
Feb 04, 2025 - 04:04 AM
To install the GAME OF BRICKS Light Kit for Christmas Tree 40573, please follow these steps:
1. Ensure that you have the correct model of the tree. The instruction manual provides separate steps for Model 1 Tree and Model 2 Trees.
2. Start with Step 1 for the corresponding model. If you have Model 1 Tree, refer to the pictures and instructions on page 1. If you have Model 2 Trees, refer to the pictures and instructions on page 10.
3. Step 1 will guide you through the installation process using Bag A. Follow the instructions and use the provided components from Bag A.
4. Move on to Step 2, which also uses Bag B. Repeat Step 2 if necessary, as indicated in the manual.
5. If you have Model 2 Trees, proceed to Step 3, which uses Bag A. Follow the instructions and use the components from Bag A.
6. Finally, complete the installation by following Step 4, which uses Bag B.
7. Once you have completed the steps, connect the light kit to the battery box. Your installation will be complete.
Please note that if you prefer to use a different power source, ensure that the maximum voltage does not exceed 6V.
If you encounter any challenges during the installation process, you can reach out to the manufacturer's support team via support@gameofbricks.eu. They offer 2 years of free light kit maintenance, so don't hesitate to seek assistance if needed.
Add New Comment