User Manual Q&AAnswer
Feb 04, 2025 - 04:03 AM
Sure! Here are the step-by-step instructions for installing the Lisen LV655 Magnetic Phone Mount for Car:
1. Loosen the fixing nut on the mount.
2. Put the rotating ball into the bolt.
3. Tighten the fixing nut to secure the rotating ball in place.
4. Turn the hook clip adjustment xxxx to adjust the hook clip to the biggest length.
5. Hook the hook clip into the air vent blade and turn the hook clip adjustment xxxx to lock it tightly.
6. When you want to disassemble the mount, reverse turn the xxxx to reach the maximum and detach it from the air vent blade.
It's important to note that the hook clip is only suitable for a horizontal air vent and not suitable for vertical and circular air vents. The length of the hook clip should be between 0.41 inch and 0.98 inch, so please confirm whether it is suitable for your car air vent before using it.
If you encounter any issues during the installation process or if the product is not suitable for your car air vent, you can contact Support@lisen.us for further assistance. They will provide after-sales service and help you with any questions or concerns you may have.
Please refer to the user guide for additional information and precautions regarding the usage of the Lisen LV655 Magnetic Phone Mount for Car.
Add New Comment