User Manual Q&AAnswer
Feb 04, 2025 - 03:42 AM
To install the Waterpik XRO-763 High Pressure Powerpulse Massage showerhead, follow these steps:
1. Remove the old showerhead and any pipe tape.
2. Make sure there are no washers from the old showerhead connected to the pipe.
3. Gather the necessary tools for installation.
4. Depending on the type of bracket you have (Type A or B, or Type C), tighten the pivot ball to the pipe and secure the large nut by hand tightening.
5. If your hose has a ridged connector, connect it to the bracket and hand tighten.
6. Connect the other end of the hose to the handheld showerhead and hand tighten.
7. Place the handheld showerhead in the bracket.
8. Adjust the spray angle by rotating the bracket forward or back.
For a more detailed installation guide, please refer to the Waterpik XRO-763 High Pressure Powerpulse Massage Instruction Manual provided with your product.
Add New Comment