User Manual Q&AAnswer
Feb 04, 2025 - 03:28 AM
To pair the Avantree BTTC-500P-GRY with your Bluetooth headphones or speakers, follow these steps:
1. Slide the Mode switch on the device to the "TX" position.
2. Slide the LL/HD switch to either the "LL" or "HD priority" position, depending on your preference.
3. The device will enter pairing mode automatically for first-time use, indicated by the "TX" LED flashing green and white quickly. If it's not the first-time use, press and hold the Bluetooth button for 2 seconds to enter pairing mode.
4. Put your Bluetooth headphones or speakers into pairing mode according to their user manual.
5. Keep the Avantree device and your headphones/speakers close to each other and wait for them to connect. Once connected, the "TX" LED will stop flashing and the "A" indicator will light up.
Note: If you're using the Avantree BTTC-500P-GRY as a Bluetooth receiver (RX mode), follow similar steps but slide the Mode switch to the "RX" position instead. Pair and connect your Bluetooth-enabled phone, PC, or tablet with the device.
For more detailed instructions and troubleshooting tips, please refer to the .
Add New Comment