User Manual Q&AAnswer
Feb 04, 2025 - 03:17 AM
To adjust the cutting height on your AL-KO Electric Lawn Mower, follow these steps:
1. Ensure that the motor is switched off and the blade is stationary before making any adjustments.
2. The method for adjusting the cutting height depends on the specific model of your lawn mower. There are two common methods:
a. Central adjustment:
- Turn the handle approximately 30° clockwise.
- Push the handle down for shorter grass or pull it up for longer grass.
- Turn the handle anti-clockwise while moving it slightly up or down until it locks into the desired position.
b. Axle adjustment:
- Keep the button on the front wheel pressed while pulling the wheel off the axle.
- Pull out the axle with the remaining wheel and insert it at the desired cutting height.
- Push the removed wheel back on. The wheel must click into place.
- Repeat the procedure with the second axle.
3. Always adjust both axles to the same cutting height to ensure an even cut.
Please refer to the product manual for illustrations and specific instructions for your model.
Add New Comment