User Manual Q&AAnswer
Feb 04, 2025 - 03:06 AM
1. Pre-installation Environment Checklist:
- Ensure that your feed water supply does not contain chlorine or chloramines above the maximum tolerance of 2 ppm. If it does, it is recommended to install a whole house carbon filtration system with chlorine or chloramine reducing media.
- Make sure the water you are using is not microbiologically unsafe. It is recommended to use pre-filtration to remove contaminants and heavy sediment for better performance and longevity of the product.
- Use only clean water softening salt with at least 99.5% purity. Extra coarse grade or crystal salt is recommended. Avoid using rock, block, or granulated salts as they may contain contaminants that could cause maintenance problems.
2. Installation Process:
- Choose a suitable location for the water softener near a drain and a power outlet. Ensure there is enough space for maintenance and regeneration.
- Connect the provided bypass valve to the control valve using the included connectors and fittings.
- Connect the inlet and outlet water lines to the corresponding ports on the control valve. Use appropriate fittings and connectors as needed.
- Connect the drain line to the control valve and ensure it is properly secured to prevent leaks.
- Plug in the power cord to the power outlet.
3. Initial Setup:
- Set the current time on the control valve by following the instructions in the user manual.
- Set the water hardness level by adjusting the hardness dial on the control valve. This information can be obtained from a water hardness test kit or by contacting your local water supplier.
- Set the regeneration time based on your household's water usage patterns. Consult the user manual for guidance on how to adjust the regeneration time.
4. Maintenance and Operation:
- Regularly check the salt level in the brine tank and refill as needed.
- Follow the recommended regeneration schedule provided in the user manual.
- Perform periodic cleaning and maintenance as outlined in the user manual to ensure optimal performance and longevity of the water softener.
Please note that this answer provides a general overview of the installation and setup process. For detailed instructions and specific guidelines, it is highly recommended to refer to the user manual provided with the AQUASURE AF-HS-025FM 8000 Grains Harmony 0.25 cu. ft. Water Softener.
Add New Comment