User Manual Q&AAnswer
Feb 04, 2025 - 03:03 AM
To connect the gofanco 70M 1x4 HDMI 2.0 Splitter/Extender to your devices, please follow these steps:
1. Power off all devices including your HDMI source and HDMI display(s).
2. Connect your HDMI source device to the Transmitter's HDMI In connector using an HDMI cable (not included).
3. Connect your CAT cables between the Transmitter and CAT6/7 Receivers.
4. Optional: If you require local monitoring of the HDMI signal, connect an HDMI display to the HDMI Out connector of the Transmitter using an HDMI cable (not included).
5. Connect an HDMI display to each CAT6/7 Receiver's HDMI Out connector using an HDMI cable (not included).
6. Optional: If you need to control your HDMI devices from a remote location, connect the IR Receiver cables and the IR Emitter cable to the IR interface ports. Make sure to connect the IR Emitter cable's IR eye in line with the source device's IR window and the IR Receiver cable's IR eye in line with the display's IR window.
7. Plug the included 12V/2A power adapter into the Transmitter's Power Jack and the included 5V/2A power adapters into each Receiver's Power Jack. Then, plug the power adapters into a reliable power outlet.
8. Power on your HDMI source device and HDMI display(s). The Splitter/Extender is now ready for use.
Please refer to the user guide for more detailed instructions and illustrations.
Add New Comment